Installation And Operating Instructions - Sulzer XRW 330 Serie Instrucciones De Instalación Y Funcionamiento

Installation and Operating Instructions (Translation of Original Instructions)
XRW 330
1 General
The main parts of the installation and operating instructions with part no. 15972513-EU (submersible mixer type ABS XRW) are also valid
for XRW 330. This also applies if the XRW 330 model Ex is connected correctly and operated in safe mode. Same applies for the Safety
Instructions. These are included in the separate booklet 15970799 and have to be studied carefully before installation and commissioning!
These "additional" installation and operating instructions for ABS submersible mixer XRW 330 contain only cross-references e.g.
the differing, additional and product specific information.
1.1 - 1.3 Introduction; Correct usage of the product; Application restrictions
See chapter 1.1 - 1.3 of the Installation and Operating Instructions 15972513-EU.
1.4 Application areas
The submersible mixer XRW 330 is used for mixing, stirring and agitating of viscous fluids containing solids in sewage treatment plants,
industry and agriculture. It is specifically designed for the major mixing functions during homogenization of sludge and coenzymes.
1.5 Identification code
See chapter 2 of the Installation and Operating Instructions 15972513-EU. *Propeller type = 2-blade special propeller for sludge and
coenzymes.
1.6 Technical data
See chapter 1.6 of the Installation and Operating Instructions 15972513-EU.
1.6.1 Technical data XRW 330, 50 Hz
[mm] [1/min]
XRW 3311 A 330 450
XRW 3312 A 330 500
XRW 3313 A 330 550
XRW 3311 B 330 580
XRW 3312 B 330 625
XRW 3313 B 330 650
XRW 3314 B 330 690
XRW 3315 B 330 710
1.6.2 Technical data XRW 330, 60 Hz
XRW 3311 A 330 450
XRW 3312 A 330 500
XRW 3313 A 330 550
XRW 3311 B 330 580
XRW 3312 B 330 625
XRW 3313 B 330 650
XRW 3314 B 330 690
XRW 3315 B 330 710
P =Power input; P = Power output; ● = Standard. ○ = Option; Cable type: 10 m cable with free ends as standard.
1 2
1.7 Nameplate
See chapter 5.5 of the Installation and Operating Instructions 15972513-EU.
1.8 Operation with frequency inverters
See chapter 10 of the Installation and Operating Instructions 15972513-EU.
1.9 Dimensions and weights
See chapter 2 of the Installation and Operating Instructions 15972513-EU.
2 - 3 Safety; Transport and storage
See chapter 3 - 4 of the Installation and Operating Instructions 15972513-EU.
EN 6006544-A
[kW] [kW/hp]
PM 30/10 3.4 3.0
PM 30/10 3.4 3.0
PM 30/10 3.4 3.0
PM 50/10 5.8 5.0
PM 50/10 5.8 5.0
PM 50/10 5.8 5.0
PM 50/10 5.8 5.0
PM 50/10 5.8 5.0
PM 30/10 3.4 3.0 / 4.0
PM 30/10 3.4 3.0 / 4.0
PM 30/10 3.4 3.0 / 4.0
PM 50/10 5.8 5.0 / 6.7
PM 50/10 5.8 5.0 / 6.7
PM 50/10 5.8 5.0 / 6.7
PM 50/10 5.8 5.0 / 6.7
PM 50/10 5.8 5.0 / 6.7
[A]
- ● 9.9 ●
- ● 9.9 ●
- ● 9.9 ●
- ● 12.9 ●
- ● 12.9 ●
- ● 12.9 ●
- ● 12.9 ●
- ● 12.9 ●
- ● 8.1 ●
- ● 8.1 ●
- ● 8.1 ●
- ● 10.9 ●
- ● 10.9 ●
- ● 10.9 ●
- ● 10.9 ●
- ● 10.9 ●
[kg]
● ○ ● 80
● ○ ● 80
● ○ ● 80
● ○ ● 80
● ○ ● 80
● ○ ● 80
● ○ ● 80
● ○ ● 80
● ○ ● 80/176
● ○ ● 80/176
● ○ ● 80/176
● ○ ● 80/176
● ○ ● 80/176
● ○ ● 80/176
● ○ ● 80/176
● ○ ● 80/176
5