Seneca Z Serie Manual De Instrucciones página 10

2.2 GENERAL CH
Thermo couple input
—
Measurement and re-transmission on isolated analog output, with voltage and current output.
—
DIP-switch for selecting: type of input, START-END, output mode
—
(zero elevation, scale inversion), output type (mA or V ).
Front panel indicating: power on, off scale or setting error.
—
3-points insulation: 1500 V .
—
3. TECHNICAL S
3.1 INPUT
Thermocouple input:
Sampling frequency:
Response time:
3.2 OUTPUTS
Output:
Data memory:
ARA TERISTIC C
type: J, K, R, S, T, B, E and N.
A
PECIFIC ATIONS
Type J, K, R, S, T, B, E, N; resolution 2.5 V, automatic TC burn out
detection, input impedance >5 M
Variable from 240 sps with 11 bits resolution + sign to 15 sps with 15 bits + sign
resolution (typical values).
35 ms with 11 bits resolution, 140 ms with 16 bits resolution.
I: 0-20 / 4-20 mA, max load resistance 600 W
V: 0-5 V / 0-10 V / 1-5 V / 2-10 V, min load resistance 2 kW
Resolution: 2.5 A / 1.25 mV.
EEPROM for all configuration data; storage time: 40 years.
S AND FEATURES
W ,
m
MI004290-E
m
protection up to 50V
~
ENGLISH 2/16