Power Supply; Environmental Conditions - Seneca Z Serie Manual De Instrucciones

INSULATIONS 1500VA
USB
12
11
10
9
8
7
POWERSUPPLY
2 3
1500 VA
1500 VA insulating voltage is among:

- power supply

- analog input
- analog output
Errors referred to maximum
measuring range:
TC input: J, K, E, T, N
TC input: R, S
TC input: B (2)
Voltage output (3)
(1) Influence of cable resistance: 0.1 V/ .
(2) Valid measurement above 250°C
(3) Values to be added to the errors of the selected input.
3.3 CONNE CT
USB Interface
3.4 POWER SUPPLY
Supply Voltage
Power supply unit
Power consumption
3.5 MODULE CASE
Case
Dimensions
Board terminals
Protection class

3.6 ENVIRONMENTAL CONDITIONS

Operating
Temperature
6
ANALOG
OUT
1
Calibration
m W
.
ION S
Micro USB connector (frontal panel)
10-40 V , 19-28 V
Classe 2
1.6 W @ 24 V with output 20 mA;
PA6, black color
Width L=100mm; Height H=112mm; Depth W=17,5mm
Removable 3 way screw terminals: pitch 5.08mm, section 2.5mm
IP20
-10°C – +60°C (UL: -10°C – +60°C)
The module complies with the following standards:
EN61000-6-4 (electromagnetic emission,
in industrial environment)
EN61000-6-2 (electromagnetic immunity,
in industrial environment)
EN61010-1 (safety)
Notes:
- Use with copper conductor.
- Use in Pollution Degree 2 Environment
- Power Supply must be Class 2
- When supplied by an Isolated Limited Voltage and/or
Limited Current power supply, a fuse rated max 2.5 A
shall be installed in the field.
Thermal
Error Coefficient
0.1% 0.01%/°K
0.1% 0.01%/°K
0.1% 0.01%/°K
0.3% 0.01%/°K
50-60 Hz,
C A
C
MI004290-E
STANDARDS
Linearity
Error
0.2°C
0.5°C
1.5°C
0.01%
through screw terminals: 2 – 3
Max: 2.5 W
EMI
<1% (1)
<1% (1)
<1% (1)
2
ENGLISH 3/16