power switch
Start the Vacuum clean
Turn on the power switch.
Caution:
cleaner to
Clear dust or other dry dirt, you must
install dustbag and foam filter.
power spply before change the accessories.
Move the Vacuum Cleaner
You can move the vacuum cleaner by holding
The handle when vacuum cleaner is working.
Connect the Floor Nozzle in the
Direction Given by the Left
figure.
Before
using
Inset the hose into the wind out blow mouth
in the direction by the left figure and you can
use for wind blowing.
Wind power Adjusting
Adjust the wind power by adjusting the
pusher When connection of hose is blocked
up.
Caution: Stop the cleaner and cut off the
the
vacuum