Safety Instructions - Black and Decker BDL170 Manual De Instrucciones

90506680 BDL170 laser 8/16/06
WARNING: Read and understand all
instructions. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious personal
injury.
SAVE THESE INSTRUCTIONS

Safety Instructions

DANGER: Laser Radiation, avoid
direct eye exposure, serious eye injury
can result.
• Do not use optical tools such as a
telescope or transit to view the laser
beam.
• Position the laser so unintentional eye
contact will be avoided.
• Do not operate the laser around children
or allow children to operate the laser.
• Do not disassemble. Modifying the
product in any way can increase the risk
of laser radiation.
WARNING: Use of controls or
adjustments or performance of
procedures other than those specified in
this manual may result in hazardous laser
radiation exposure.
• Do not operate in explosive atmospheres,
such as in the presence of flammable
liquids, gases, or dust.
• Use only with the specifically designated
batteries. Use of any other batteries may
create a risk of fire.
• Store idle product out of reach of children
and other untrained persons. Lasers are
dangerous in the hands of untrained
users.
• Use only accessories that are
recommended by the manufacturer for
your model. Accessories that may be
suitable for one laser, may create a risk of
injury when used on another laser.
• Repairs and servicing MUST be
performed by a qualified repair facility.
Repairs performed by unqualified
personnel could result in serious injury.
• Do not remove or deface warning labels.
Removing labels increases the risk of
exposure to radiation.
• For indoor use only.
• This product is intended for use in a
temperature range of 41°F(5°C) -
104°F(40°C).
CAUTION: Use caution when drilling,
nailing or cutting into walls, floors and
ceilings which may contain electrical
wiring or pipes. Always turn off the
power when working near electrical
wires.
CAUTION: Use of controls or
adjustments or performance of procedures
other than those specified in this manual
7:20 AM Page 2
may result in hazardous laser radiation
exposure.
The label on your tool may include the
following symbols.
V ................................volts
mW ............................milliwatts
nm..............................wavelength in
Class 2 ......................Class 2 Laser
For your convenience and safety, the
following labels are on your laser.
2
nanometers