Additional Features; Temperature Monitoring - Metcal PCT-1000 Guia Del Usuario

5. Additional Features

Temperature Monitoring

1.
1. While using the PCT-1000 with the internal thermocouple (INT see
Figure. 2 above), the two external thermocouples may be used to
monitor temperature.
2. Attach a thermocouple to TC1 and/or TC2 and attach to the area to be
monitored. When attached, the appropriate thermocouple will be
displayed (see Figure 3 above).
6. Troubleshooting
1. Unit does not power ON
11. Check the power cord
12. Check to see that you have mains voltage
2. OH displayed on the LED screen
1. Unit has exceeded the internal safety cut-off
2. Allow unit to cool
3. Check placement of thermocouple (if used)
4. Reset the unit by cycling the power
5. Review program, consult Advanced Users Guide.
3. TCFAULT displayed on LED screen
1. Check location of thermocouple
2. Ensure the thermocouple is firmly inserted into the correct TC
connector
3. Replace thermocouple if problem persists
4. Flashing zone and temperature parameters while in Run Mode.
1. Indicates the unit cannot meet the programmed time and
temperature as set.
2. Review program, consult Advanced User Guide.
If you cannot resolve the problem after conformation of the above, please contact your
local OK International representative.
7. Warranty
Please visit OK International's products web page (www.metcal.com) where you will find
available information on systems, tips, accessories, technical notes, and more. You may
also contact your local OK International representative for pricing and availability.
OK International warrants the PCT-1000 programmable Preheater against any defects in
materials or workmanship for one (1) year from the date of purchase by the original
owner. This Warranty excludes normal maintenance and shall not apply to any opened,
misused, abused, altered or damaged items. If the product should become defective
within the warranty period, OK International will repair or replace it free of charge at its
sole option. The replacement item(s) will be shipped, freight prepaid, to the original
purchaser. The warranty period will start from the date of purchase. If the date of
purchase cannot be substantiated the date of manufacture will be used as the start of
the warranty period.
8. Safety
5