Controls And Instruments - GOLDONI STAR Serie Manual De Operación Y Mantenimiento

2. CONTROLS AND INSTRUMENTS

See fig.1
1 Clutch pedal gear change
2 PTO clutch lever
3 Speed range select lever (F-C-Rev)
4 Gear select lever (1st-2nd-3rd-4th)
5 Creeper lever (only for 24-speed models with creeper); GEARSHIFT MODE
selector lever (16+8-8+8) only for models with Dual Power and reverse
shuttle.
6 Front drive engage pedal
7 Rear differential lock button
8 PTO engage lever (normal and synchronised)
9 PTO lever 540/750 Rpm (optional: 540/1000 Rpm)
10 Accelerator pedal
11 Main brake pedals
12 Brake pedal locking lever (mandatory for on-road driving)
13 Parking and emergency brake lever
14 Controlled draught lift lever
15 Controlled position lift lever
16 Lift speed regulating and locking knob
17 Gearbox casing oil filler plug and level
18 Seat lengthwise adjusting lever
19 Seat height adjuster lever
20 Seat suspension adjuster knob
21 Seat suspension adjuster lever
See fig.2
1 Hour counter - Rpm counter and speedometer
2 Light switch and horn button
3 Engine ignition and stop key
4 Dual Power or Reverser lever
5 Steering wheel height adjustment lever
6 Emergency light button
7 Turn signal switch
8 Hand throttle
9 Engine radiator fluid thermometer and fuel gauge
10Front PTO switch (optional)
11Single-pole power socket
See fig.30
For tractors with a dashboard as shown in fig.30, the indicator lights signal the
following fucntions:
1. Yellow pre-heat and glow plug indicator light
2. Red alternator warning indicator light (off when engine running)
64