Honeywell FocusPRO TH6000 Serie Guia De Instalacion página 2

Wallplate installation
1. Separate wallplate from thermostat.
2. Mount wallplate as shown below.
Drill 3/16" holes for drywall. Drill 7/32" holes for plaster.
Wall anchors
CAUTION: ELECTRICAL HAZARD
Can cause electrical shock or equipment damage. Disconnect power before
beginning installation.
MERCURY NOTICE
If this product is replacing a control that contains mercury in a sealed tube, do
not place the old control in the trash. Contact your local waste management
authority for instructions regarding recycling and proper disposal.
69-2738EFS—03
Insert reference card after wallplate is
mounted (see instructions, below).
M29433
Wire hole
Wallplate
2
MCR29434
Mounting screws
MCR29435