Coway aquamega 200C Manual Del Usuario página 17

N OTE
You can drink cold water after about two hours from the installing the product.
4
Open the shut-off valve and the T-valve and
check for leakages.
5
After connecting the tube, plug the power cord
and, dispense the ambient water for 3 minutes
before using the cold water.
C AUTION
- For continuous dispensing, use a drain hose.
-  M ake sure that you run the ambient water to flush
the filters before using the cold water.
6
After flush the filters with Ambient water, fill
the cold water tank to start cooling. Select Cold
water and press the dispensing button for 2
seconds for continuous dispensing. It will take
about one minute to fill up the cold water tank.
7
Assemble the mesh filter and the stopper.
17