Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Turn off power and then connect the accessory cable between the COM port of PC and torque
wrench.
-
Make sure the connection between PC and wrench is normal.
-
Change the wrench operation mode to "Send". (Please refer to "Peak Hold Mode Recorded
Value Review" section)
-
Use PC to start the uploader program.
-
In uploader program, first select the correct COM port No.
-
Next, select the file path to save the uploaded data.
-
Finally, press "upload" button to transmit the torque records to PC.
-
The uploaded data is then shown on the column and saved in the *.csv file. Use Microsoft
Excel to view *.csv file.
CAUTIONS: Refer to the uploader program user guide for the detail operations.
CONNECTING COMMUNICATION CABLE
UPLOADING RECORD DATA
31
Publicidad
Tabla de contenido
