Certificados; Fm (Nec) - MTS Sensors Level Plus Manual De Funcionamiento

13.2 Certificados

Copias para descargar de todos los certificados locales se pueden
encontrar en www.mtssensors.com y se pueden descargar en la
página de inicio específica del producto. Si tiene alguna dificultad
para obtener los certificados desde la web, comuníquese con Soporte
Técnico de MTS y ellos se los enviarán de forma electrónica.
B

13.3 FM (NEC)

13.3.1 Seguridad intrínseca
13.3.1.1 Condiciones específicas para un uso seguro
1. La carcasa del aparato contiene aluminio y se considera que esto
constituye un riesgo potencial de ignición por impacto o fricción.
Se debe tener cuidado durante la instalación y el uso para evitar
impactos o fricción. (cuando se instala con aprobación de Ga)
2. La temperatura ambiente máxima permitida del transmisor de nivel
USE FM LOGO ARTWORK
digital/analógico Level Plus
producidos por la temperatura del proceso y otros efectos térmicos,
se debe tener cuidado para garantizar que el ambiente circundante y
el ambiente dentro de la carcasa del transmisor no supere los 71 °C
3. Algunos modelos contienen piezas no metálicas en la carcasa. Para
ENTITY PARAMETERS:
evitar el riesgo de chispas electrostáticas sobre la superficie no
metálica, la superficie se debe limpiar solo con un paño húmedo.
SEE PRINT REFERENCE CHART
B
13.3.1.2 Etiquetas
MTS Systems Corporation
Sensors Division
3001 Sheldon Dr.
NOTES:
Cary, NC 27513
1. STANDARD LETTERING UNIVERS 55
A
OR ITC GARAMOND BOOK.
2. MATERIAL TO BE SCREEN PRINTED ALUMINUM WITH SATIN
B
Model No:
BACKGROUND AND BLACK TEXT OR LASER ETCHED ALUMINUM.
Serial No:
∆
3.
Date :
4. DIMENSIONS IN BRACKETS [ ] ARE IN INCHES.
5. MATERIAL: .8 [0.03] THICK ALUMINUM
6. REFER TO TABLE 1 FOR "L1" & "L2" DIMENSIONS.
NOTES:
1. STANDARD LETTERING UNIVERS 55
WARNING: REFER TO INSTALLATION DRAWING FOR CAUTION/WARNINGS
OR ITC GARAMOND BOOK.
2. MATERIAL TO BE SCREEN PRINTED ALUMINUM WITH SATIN
A
BACKGROUND AND BLACK TEXT OR LASER ETCHED ALUMINUM.
∆
3.
4. DIMENSIONS IN BRACKETS [ ] ARE IN INCHES
Fig. 14: Etiqueta FM de seguridad intrínseca, Modbus o DDA, carcasa NEMA
5. MATERIAL: .8 [.03] THICK ALUMINUM
6. REFER TO TABLE 1 FOR "L1" & "L2" DIMENSIONS.
USE MTS LOGO
10 POINT SIZE
4.5 POINT TEXT SIZE
MTS TO PRINT
MODEL NO.
SERIAL NO.
DATE CODE.
es de 71 ºC. Para evitar los efectos
®
4.5 POINT TEXT SIZE
MTS TO PRINT
MODEL NO.
8 POINT TEXT
SERIAL NO./DATE CODE
SIZE
Level Plus Transmitter
®
8.97 [.35]
MTS TO PRINT
MODEL NO.
INDICATES CRITICAL DIMENSIONS.
SERIAL NO./DATE CODE
INTRINSICALLY SAFE
FM
US
CL. I, Div. 1, GR. ABCD
APPROVED
CL. I, Zone 0/1, AEx ia IIC T4
8.97 [.35]
Ta = -50°C to +71°C
C
when connected in accordance
with FM approved installa on
B
drawing # 651543-1
A
R E V
P/N 551629-1 Rev B
PROPRIETARY DATA
INDICATES CRITICAL DIMENSIONS.
69.85 [2.75]
THE INFORMATION AND DESIGN(S) DISCLOSED
HEREIN ARE THE PROPERTY OF MTS SYSTEMS
CORPORATION AND MAY NOT BE USED,
REPRODUCED OR DISCLOSED IN ANY FORM
EXCEPT AS GRANTED IN WRITING BY MTS
SYSTEMS CORPORATION. THIS RESTRICTION
EXCLUDES INFORMATION THAT IS IN THE
2
ARTWORK
2
Fig. 15: Etiqueta FM de seguridad intrínseca, HART
R3.30 [.13]
2
MTS Systems Corporation
Sensors Division
3001 Sheldon Drive, Cary, N.C. 27513
***NO REVISIONS SHALL BE MADE WITHOUT TH
INTRINSICALLY SAFE
7847 CL. I, Div. 1, GR. ABCD
B
3.47 [.14]
28.70 [1.13]
CL. I, Zone 0/1, AEx ia IIC T4
Ta = -50°C TO +71°C ; IP65
WARNING: SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY
A
7570
1.78 [.07] REFER TO INSTALLATION DRAWING FOR CAUTION/WARNINGS
REV
ECO #
Fig. 16: Etiqueta FM de seguridad intrínseca, Modbus o DDA, carcasa
con cavidad individual o doble
PROPRIETARY DATA
15.80 [.62]
THE INFORMATION AND DESIGN(S) DISCLOSED
HEREIN ARE THE PROPERTY OF MTS SYSTEMS
MTS Systems Corporation
Sensors Division
CORPORATION AND MAY NOT BE USED,
3001 Sheldon Drive, Cary, N.C. 27513
REPRODUCED OR DISCLOSED IN ANY FORM
EXCEPT AS GRANTED IN WRITING BY MTS
SYSTEMS CORPORATION. THIS RESTRICTION
***NO REVISIONS SHALL BE MADE WITHOUT THE NOTIFICAT
INTRINSICALLY SAFE
CL. I, Div. 1, GR. ABCD
EXCLUDES INFORMATION THAT IS IN THE
3.47 [.1
CL. I, Zone 0/1, AEx ia IIC T4
IP65 8256
;
PUBLIC DOMAIN OR WAS LEGITIMATELY IN THE Ta = -50°C TO +71°C ; IP65
34.69 [1.37]
WARNING: SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY
PRIOR POSSESSION OF THE RECIPIENT.
REFER TO INSTALLATION DRAWING FOR CAUTION/WARNINGS
7 8 4 7
7570
Fig. 17: Etiqueta FM de seguridad intrínseca, HART
1.78 [.07]
2
E C O #
I 21 I
***NO REVISIONS SHALL BE MADE WITHOUT THE NOTIFICAT
Level Plus
8 POINT TEXT
Level Plus Transmitter
MTS Systems Corporation
Sensors Division
3001 Sheldon Dr.
Cary, NC 27513
Model No:
Serial No:
Date :
FM
US
APPROVED
"L1"
∆ "L2"
WARNING: REFER TO INSTALLATION DRAWING FOR CAUTION/WARNINGS
USE MTS LOGO ARTWORK
14.0 POINT SIZE
69.85 [2.75]
7.5 POINT SIZE
Level Plus Transmitter
R
"L1"
∆
"L2"
IP RATING WAS 66
RELEASE TO PRODUCTION
USE MTS LOGO ARTWORK
14.0 POINT SIZE
DESCRIPTION
7.5 POINT SIZE
Level Plus Transmitter
R
86.30 [3.40]
- THREAD DEPTHS ARE TO MIN. FULL THD
- DRILL DEPTHS ARE TO FULL DIA.
- REMOVE BURRS AND SHARP EDGES
- DO NOT SCALE PRINT
P I
- MACHINED SURFACE FINISH 3.2uM [125
RELEASE FOR PRODUCTION
UNLESS OTHERWISE SPECIFIED
TOLERANCES
0 PLACES
MM
0.5
- THREAD DEPTHS ARE TO MIN. FULL THDS
- DRILL DEPTHS ARE TO FULL DIA.
CON COMPARTIMIENTOS
®
Manual de funcionamiento
SIZE
®
INTRINSICALLY SAFE
CL. I, Div. 1, GR. ABCD
CL. I, Zone 0/1, AEx ia IIC T4
Ta = -50°C to +71°C
IP65
;
when connected in accordance
with FM approved installa on
drawing # 651543-1 651544-1
P/N 551629-1 Rev B 551641-1
1
, carcasa NEMA
®
FM
APPROVED
INSTALL PER DRAWING # 651543-1
SUPPLY VOLTAGE: 28 VDC
P/N 551634-X Rev C
UNLESS OTHERWISE SPECIFIE
TOLERANCES
0 PLACES 1 PLACE
FM MM
MM
APPROVED
0.5 0.1
INSTALL PER DRAWING # 651544-1
SUPPLY VOLTAGE: 28 VDC
ADDED "D1"
P/N 551642-X Rev C
R A T N I G W A S 6 6
, carcasa con cavidad individual o doble
®
NOTES:
D E S C R P I I T O N
1. STANDARD LETTERING 4.0 POINT TEXT SIZE
TITLE
(TYP.)
OR ITC GARAMOND B
2. DIMENSIONS IN BRAC
1 PLACE
ANGLES
IN INCHES.
MM
0.1
3. MATERIAL: 3M 7883 M
FIRST
POLYESTER FOIL W/G
ANGLE
R
2
1.78 [
1
DASH
3
#
-1
1.78 [
-2
FM
4.5
17.53
"D
SEE
4.0 POINT
(TYP.)
ANGLE
17.53
"D
SEE
(AC
m