Technical Specifications - MGE Pulsar 700 Manual De Instalación Y De Usuario

E N G L I S H

Technical Specifications

Output power
AC input power
◗ Voltage
◗ Frequency
◗ Power factor
Load output
◗ Voltage
◗ Frequency
◗ Harmonic distortion
◗ Overload capacity
◗ Current
Battery, sealed lead acid,
maintenance free
Environment
◗ Operating temperature range
◗ Relative humidity
◗ Leakage current
◗ Storage temperature range
◗ Altitude
Standards and certification
◗ Safety
◗ EMC
◗ Surge suppressor
(1) EXB Module for Pulsar 1000 and Pulsar 1500
(2) EXB RT2U Module for Pulsar 1000 RT2U and Pulsar 1500 RT2U.
(3) 900W, in standard configuration, 800W with at least 1 EXB connected
(4) 1290W in standard configuration, 1200W with at least 1 EXB connected
(5) Values for 33% / 66% / 100% of nominal power rating
(6) Adjustable from 100V to 127V using the UPS Config software
(7) Frequency-converter mode is programmable using the UPS Config software
(8) Nominal, for 120V output voltage
86-86700-00 A01
Pulsar 1000
Pulsar 700
Pulsar 1000 RT2U
700VA / 630W 1000VA /900 W
Single phase 60 / 70 / 80V to 142V (5)
50/60 Hz autoselect
> 0.95
Single phase 120V ±3% (6)
50/60 Hz ±0.5% (7)
< 4% for linear load, < 6% for nonlinear load
102% continuous, 130% 12s, > 130% 2s
5.8A (8) 8.3A
2x12V – 7Ah 3x12V – 7Ah
20% to 90% (without condensation)
UL 1778 (4th edition), CSA C22.2 No 107.3-05
FCC Subpart B, class A
IEEE/ANSI 62.41
Appendix
Pulsar 1500
Pulsar 1500 RT2U
(3) 1500VA /1290 W (4)
(8) 12.5A (8)
3x12V – 9Ah
0°C to 40°C
< 1.1mA
-25°C to 40°C
1000 m
Appendix
Pulsar EXB
1000/1500 (1)
Pulsar EXB
1000/1500 RT2U (2)
Two string of
3x12V -9Ah
A — 1