Pearpoint P340 flexiprobe Guia Del Usuario página 10

Still pictures
Press the key at anytime to take still pictures.
Enter job details if required:
• Review Client Name, Site Address and Survey Start and Finish Survey
references by pressing the
press OK again to accept the changes.
• On the keypad, press the
in jpeg format.
You can take screen captures in recording, playback and general inspection
modes. Note that screen captures will also record any on-screen text,
excluding the menu.
Video playback and photo review
To browse your Compact Flash card or USB flash drive, press the video
key on the keypad.
The card browser will open; use the
you wish to view and then press OK or video
Video Playback or Photo review will begin immediately.
You can pause or stop video playback at anytime using the
keys.
You can stop reviewing a photo by pressing the
To Fast-Forward press the
playback speed, press the video
To Rewind press the
playback speed, press video
During playback, you can adjust the sound volume at anytime by pressing
F1 or F2.
Storing your Jobs onto your pC
If you have used a USB flash drive connect this to a spare USB port of your
PC and go to step 4.
Or:
If you have used a CF card:
1 Switch the controller off.
2 Connect the USB cable to the unit and to your computer.
3 Your computer will recognize the unit as a Mass Storage Device.
4 Start flexisight manager.
5 Press the Import Button.
6 Select the Removable Disk in which your Jobs are stored.
7 Press OK.
For more information, please refer to the Operation Manual available in the
FlexiSight Manager CD or to download from the Radiodetection website.
and
key to capture a picture of the screen
and
arrow key during playback. To resume normal
key.
arrow key during playback. To resume normal
.
10
keys. Press OK to Edit and then
arrows to navigate to the file
.
key or pressing
or keypad
.