Bostitch BT125 Manual De Operación Y De Mantenimiento página 8

DIAL-A-DEPTH
TM
FASTENER CONTROL ADJUSTMENT
The DIAL-A-DEPTH
TM
Fastener control adjustment
feature provides close control of the fastener drive
depth: from flush with the work surface to shallow or
deep countersink.
First set the air pressure for consistent drive in the
specific work as described on page 4, then use the
DIAL-A-DEPTH
TM
fastener control adjustment to give
the desired depth of drive.
Note: Any tools that do not come in a kit
will have a non-adjustable depth of drive.
DEPTH ADJUSTMENT NUT
IN ADDITION TO THE OTHER WARNINGS CONTAINED IN THIS
MANUAL
OBSERVE THE FOLLOWING FOR SAFE OPERATION
• Use the BOSTITCH pneumatic tool only for the purpose for which it was designed.
• Never use this tool in a manner that could cause a fastener to be directed toward the user
or others in the work area.
• Do not use the tool as a hammer.
• Always carry the tool by the handle. Never carry the tool by the air hose.
• Do not alter or modify this tool from the original design or function without approval from
BOSTITCH, INC.
• Always be aware that misuse and improper handling of this tool can cause injury to
yourself and others.
• Never clamp or tape the trigger or contact trip in an actuated position.
• Never leave a tool unattended with the air hose attached.
• Do not operate this tool if it does not contain a legible WARNING LABEL.
• Do not continue to use a tool that leaks air or does not function properly. Notify your nearest
Bostitch representative if your tool continues to experience functional problems.
-8-