INSERT MICRO SD CARD
To capture images with your microscope while not
connected to a computer, insert a Micro SD card in the
card slot (13) on the back of the unit. Press fi rmly until
the card clicks into place.
NOTE:
A MicroSD card is NOT included. To capture images without a MicroSD
card, see section 7 in this manual for instructions on installing the computer
software and saving images directly to your computer.
NOTE:
Format your MicroSD card before use. See section 4 for details on formatting
the card.
DISPLAY ICONS
Small Image Capture
Video Capture
Time Lapse Capture
Number of Images Taken/Number of
Images Remaining
Video Capture Time Remaining
(Hours:Minutes:Seconds)
MicroSD Card Recognized
Video Capture Setting
Current Resolution Setting
Battery Power Indicator
NOTE:
The display icons can be turned off by pressing down on the zoom control button
5
ENGLISH