Kensington KeyCover Plus Guía Rápida página 6

5 The KeyCover now appears on your iPad screen. Tap Bluetooth Keyboard. Your iPad
screen displays a passkey. Enter the passkey on the keyboard, and press Enter.
Bluetooth Keyboard
6 Your iPad screen shows the KeyCover as Connected. On the KeyCover, the Bluetooth
Status Indicator Light turns off. You can now use your KeyCover to type in any app.
Bluetooth Keyboard
* If the KeyCover is not in pairing mode, press the Pairing Key for 3 seconds. The
Bluetooth Status Indicator Light starts blinking. Repeat steps 3 through 6.
NOTE: The KeyCover will go into sleep mode if left idle for 10 minutes. To wake up the
KeyCover, press any key to resume the connection.
To extend battery life, turn off the KeyCover when not in use.
Backlight Functions
To turn on
backlight
To turn off
backlight
To change
backlight
colors
To conserve battery life, backlight turns off after 15 seconds if no key is pressed. Any key
press will turn on backlight again. Backlight functions are automatically disabled when
battery level is low.
+
+
X3
+ 1
Connected
3 seconds
To increase
brightness
To decrease
brightness
2 3 4
4
+
+
5 6 7