Casio CGP-700 Guia Del Usuario página 33

Recording and Playback
To record to a specific track (Part)
You can record specific instruments, the left hand and
right hand, or other parts of a song individually, and
then combine them into a final song.
■ What is a track?
A "track" is a separate recorded part of a song. The
MIDI Recorder of this Digital Piano has a total of 17
tracks, one of which is a system track as described
below.
System Track
In addition to notes you play on the keyboard and
other performance operation data, the system track
also includes a wide range of setup information for
the song, including layer on/off, split on/off, tempo,
Auto Accompaniment settings, reverb type, etc.
When you record a single-track song to recorder
memory, as shown under "Recording to Digital
Piano Memory (MIDI Recorder)" (page EN-31)
everything is recorded to the system track.
Tracks 01 through 16
These tracks can be used to record notes, as well as
pitch bend wheel and pedal operations, and the
keyboard tone setting. These tracks can be combined
with the system track and each other to create the
final song.
EN-32
■ Supported Track Data
The following describes the data that can be recorded
to each type of track.
System Track, Tracks 01 through 16
Keyboard performance*
pedal and pitch bend wheel operation, mixer settings
(except for part on/off)
System Track only
Rhythm, balance setting, effect setting (reverb, chorus,
delay), tempo, Auto Accompaniment performance/
setting, one-touch preset, music preset performance*
registration*
2, 3
*1 Upper 1 only for Tracks 1 through 16
*2 Recall only
*3 The Auto Accompaniment volume level and
transpose setting of the recalled data is not included
in the recording.
1.
Record the first part to the system track.
• Use the procedure under "Recording to Digital Piano
Memory (MIDI Recorder)" (page EN-31) to record to
the system track.
2.
Next, select the tone of the part you want to
play and record.
3.
On the MENU screen, touch "MIDI
RECORDER".
4.
Touch "0" to enter the recording mode.
5.
Touch the track name.
6.
Touch the track (Solo Track 1 through Solo
Track 16) you want to record.
7.
Start playing something on the keyboard.
This starts recording along with playback of what you
recorded to the system track, so you can play along
with system track.
, the keyboard tone setting*
1
,
1
,
2