Saivod SAP 717 Manual De Instrucciones página 77

Install drainage pipe
Note:
Install drainage pipe before using, otherwise poor drainage will affect normal
operation of the unit.
1. Remove the rubber plug at drainage port.
2. Fix the drainage pipe clip on the right of rear side plate near drainage port with
a screw.
3. Put the drainage pipe into drainage port and screw it up, and then bind it with
pipe hoop.
4. Put the rubber plug into the other side of drainage pipe, fix it with pipe hoop and
then fix it in the drainage pipe clip.
rubber plug drainage port
drainage port
drainage pipe
drainage pipe clip
rubber plug
pipe hoop
drainage port
77
screw
pipe hoop
drainage pipe clip