Saivod SAP 717 Manual De Instrucciones página 81

Installation and disassembly of heat discharge pipe
Install heat discharge pipe
1. Rotate joint A and joint B clockwise into the two
ends of heat discharge pipe.
2. Insert joint A of heat discharge pipe (the side with "TOP" is upwards) into the groove until
you hear a sound.
3. Aim the locating pole of joint B of heat
discharge pipe at the opening of joint C;
rotate it slightly to make joint B
and joint C connect tightly.
clasp
groove
correct
correct
clockwise
joint A
the side with "TOP" is upwards
joint B
correct
wrong
81
clockwise
joint B
heat discharge pipe
locating pole
opening
joint C
.
tightened status