Setting The Alarm Time - SunTech RP-DS800 Manual Del Usuario

SETTING THE ALARM TIME

1. Long press the [ALARM] button until both the HOUR &
AL flashing, rotate the [TUNING] knob to adjust the hour,
then short press [ALARM] with the minutes flashing.
2. Rotate the [TUNING] knob to adjust the minutes and
short press the [ALARM] button with the "
flashing.
3. Rotate the [TUNING] knob to select 1 ~ 90 minutes to set
the Auto Alarm Off Timer.
4. Short press the [ALARM] button to confirm and notice
" " shows on display to activate the alarm by buzzer
(BB sound). Short press twice with "
the alarm by radio.
5. To turn off the alarm function, repeat short pressing the
[ALARM] button and notice both "
PRESET ALARM STATION
1. Turn on the radio, then tune into your favorite alarm radio
station and adjust your desired alarm volume level.
2. Short press the [M] button to store the alarm station into
memory.
3. Repeat short pressing the [ALARM] button and notice
" " shows on the display to confirm the preset alarm
station.
SNOOZE / LIGHT FUNCTION
After alarm was activated with buzzer or radio broadcasting,
press & release [LIGHT / SNOOZE] with a "B" sound. Then
the radio would be turned off temporary, it will start to alarm
again 5 minutes later.
For the LCD backlight function, short press the [LIGHT]
button to illuminates the LCD for 3 seconds. Long press it
for permanently illumination. Press again the [LIGHT/
SNOOZE] button to turn off the light.
14
RP-DS800 ENGLISH MANUAL
SLEEP
" symbol
" appears to set
" & " " disappear.