Manual Tuning - SunTech RP-DS800 Manual Del Usuario

3. Long press the [ETM] button until
the frequency running to auto
scan the stations within present
band.
4. When the frequency stop running,
turn around the [TUNING] knob
for those scanned stations.
5. Short press either the [VF] & [VM]
button with frequency flashing
and the disappearance of ETM
on the display to exist ETM mode.
Notes:
FM station: When you are in a different city or country, you
should perform the ETM function again, because this will not
delete any of the stations already within the memory.
MW station: It is recommendable to perform the ETM
function during day time as well as night time, because
there usually are more stations that start broadcasting at
night
SW station: It is recommendable to perform the ETM
function in the morning, afternoon as well as night time,
because the transmitting signal of SW is very unstable and
there usually are more stations that start broadcasting in
the late afternoon.
Method 2:

MANUAL TUNING

Turn on the radio, short press
the [VF] button to switch into
frequency mode. Rotate the
[TUNING] knob to select your
station.
8
RP-DS800 ENGLISH MANUAL
Frequency
running
SLEEP
FAST/SLOW tuning is shown in the chart
below for each band.
step
Slow tuning mode
band
FM 0.01 MHz
MW
1kHz
LW
1 kHz
SW 1 kHz
flashing
Station
Fast tuning mode
0.1 MHz
9 /10kHz
9 kHz
5 kHz