ClearSounds CSC1000 Manual De Uso página 40

5. Press ▼ to choose Record OGM and then press the Select
soft key. Speak clearly into the microphone, which is
located below the Redial button.
6. The display will show Record OGM?. Press Yes to confirm
or press No to cancel.
7. You can record your OGM after the tone. Recording will
stop automatically after 2 minutes. You can also confirm
and end the recording by pressing the End soft key. The
new OGM will be played after the recording.
8. To exit, press the Exit soft key 3 times to return to the
main screen. Otherwise, after 1 minute, the display
will automatically return to the main screen.
NOTE: For best results when recording the outgoing
message, speak directly into the base microphone (located
below the Redial button, see Location of Controls on page
7)
Sample Outgoing Announcement
Hi, this is (use your name here), I can't answer the phone
right now so please leave your name, number and a brief
message after the tone and I'll get back to you. Thank
you.
To Play the Outgoing Message
1. Press the Menu soft key to display the main menu list.
2. Press ▼ to move to TAM setup and then press the Select
soft key.
3. Press ▼ to choose Outgoing Msg and then press the
Select soft key.
4. Press ▼ to choose Play OGM and then press the Select
soft key.
40 – ENGLISH