Personalisations; Setting The Temperature; Setting The Spin Speed; Functions - Ariston AVL 109 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Personalisations

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6).
The temperature can be lowered, or even set to a cold wash ( ).

Setting the spin speed

Turn the SPIN SPEED knob to set the spin speed for the programme selected.
The maximum spin speeds for each programme are as follows:
Programmes
Maximum spin speed
Cottone
1000 rpm
Synthetics
800 rpm
Wool
600 rpm
Silk
no
The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting symbol
The washing machine will automatically prevent you from selecting a spin speed higher than the maximum
speed for each programme.

Functions

To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
Function
Effect
Delay
Delays the
Timer
start of the
wash by up to
9 hours.
Super
Allows for an
Wash
impeccable
wash, visibly
whiter than a
standard Class
A wash.
Easy iron
This option
reduces the
amount of
creasing on
fabrics, making
them easier to
iron.
Rapid
Cuts the
duration of the
wash cycle by
30%.
Comments
Press the button repeatedly until the LED corresponding to
the desired delay is turned on.
The fifth time the button is pressed, the function will be
disabled.
N.B.: Once you have pressed the Start/Reset button, the
delay can only be decreased if you wish to modify it.
This function is incompatible with the RAPID function.
When this function is set, programmes 6, 7, 8, 11 and
Delicate rinse will end with the laundry left to soak (Anti-
crease) and the Rinse cycle phase LED
- to conclude the cycle, press the START/RESET button;
- to run the draining cycle alone, set the knob to the
relative symbol
and press the START/RESET button.
This function is incompatible with the SUPER WASH
function.
.
Enabled with
programmes:
All
1, 2, 3, 4,
5, 6, 7, 8
All
programmes
will flash.
except for
1, 2, 9, 10
and Draining.
1, 2, 3, 4,
5, 6, 7, 8
GB
7

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido