Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TOP PANEL FEATURES
2
3
1.
Velocity Sensitive keys – When you play the keys on the keyboard, they will respond based on the
force you produce when striking the keys. The LIVE 88 keys are semi-weighted.
2.
Pitch Bend wheel- Transmits MIDI Pitch Bend information to raise or lower the pitch of a note
temporarily.
3.
Modulation wheel- This wheel can be used to transmit continuous controller data (CC #1 or
Modulation Depth).
4.
Standby button- This switches and indicates the power status between Standby and Active modes.
5.
Octave + - buttons- Press one of these buttons to shift the keyboard's octave range up or down.
6.
Control Dial- This is used to send MIDI data.
7.
Prog- This mode allows the data dial to send Program Change messages
8.
Bank- This mode allows the data dial to send Bank Change messages
9.
Volume- This mode allows the data dial to send MIDI volume change messages.
Note: Press the BANK and VOLUME buttons simultaneously to select velocity curve.
10.
Channel- This allows the numerical keys to change the sending MIDI channel.
Note: Press the CHANNEL and SPLIT buttons simultaneously to select After-Touch curve using
numerical keys on the keyboard.
11.
Split- This button is used to split the keyboard into two ranges.
12.
Numeric keys- These keys are used to let you select specific MIDI channels or curves.
REAR PANEL FEATURES
1.
USB PORT – This is used to USB bus power the keyboard and allows you to send MIDI data.
2.
MIDI Out- Connect a standard 5 pin DIN MIDI cable to send data to a MIDI module or another
keyboard's MIDI input. If you are only using the MIDI output port, you will need to use an AC adapter
(not included) to the POWER IN jack in order for this to be activated.
3.
Pedal jack- This switch type 1/8" TRS input is used to add sustain.
6
4
5
12
2
8
9
10
11
7
1
3
1
4
Publicidad
Tabla de contenido
