Tabla De Contenido; Safety Guidelines - Definitions; Intended Use; Chain Saw Names And Terms - BLACK&DECKER LCS120 Manual De Instrucciones

taBle of Contents
Safety guidelines - Definitions .................................................2
Chain Saw Terms.....................................................................2
Important Safety Instructions ...................................................3
Components.............................................................................6
Important Safety Instructions for Battery Chargers ..................6
Important Safety Instructions for Battery Packs .......................7
Charging Procedure .................................................................8
Preparing Chain Saw for use ..................................................10
Assembly .................................................................................10
Operating the Chain Saw .........................................................12
Maintenance ............................................................................15
Service Information ..................................................................16
Full Two-Year Home use Warranty .........................................16
Troubleshooting .......................................................................17

safety Guidelines - definitions

It is important for you to read and understand this manual. The
information it contains relates to protecting YOuR SAFETY and
PREVENTINg PROBLEMS. The symbols below are used to help
you recognize this information.
danGer:
Indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
warninG:
Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
Caution:
Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
notiCe:
used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result in
property damage.

intended use

Your Black & Decker Cordless Chain Saw is ideal for pruning
applications and cutting small logs up to 8 inches (203 mm) in
diameter. This tool is intended for consumer use only.

Chain saw names and terms

• Bucking - The process of cross cutting a felled tree or log into
lengths.
• Motor Brake - A device used to stop the saw chain when the
trigger is released.
• Chain Saw Powerhead - A chain saw without the saw chain and
guide bar.
• Drive Sprocket or Sprocket - The toothed part that drives the
saw chain.
• Felling - The process of cutting down a tree.
• Felling Back Cut - The final cut in a tree felling operation made
on the opposite side of the tree from the notching cut.
• Front Handle - The support handle located at or toward the front
of the chain saw.
• Front Hand Guard - A structural barrier between the front handle
of a chain saw and the guide bar, typically located close to the
hand position on the front handle and sometimes employed as an
activating lever for a chain brake.
• Guide Bar - A solid railed structure that supports and guides the
saw chain.
• Guide Bar Scabbard - Enclosure fitted over guide bar to prevent
tooth contact when saw is not in use.
• Kickback - The backward or upward motion, or both of the guide
bar occurring when the saw chain near the nose of the top area
of the guide bar contacts any object such as a log or branch, or
when the wood closes in and pinches the saw chain in the cut.
• Kickback, Pinch - The rapid pushback of the saw which can
occur when the wood closes in and pinches the moving saw chain
in the cut along the top of the guide bar.
2