Thank you for choosing the KRUPS XL 2000 Perfect Milk Frother. You will enjoy the simplicity in use
to froth and heat milk. Thanks to the KRUPS Frothing Control
have you producing barista-quality beverages in the comfort of your home. "
KRUPS Frothing Control
This patented technology takes the guesswork out of hot milk preparation. The machine automatically
achieves expert results by constantly monitoring the temperature of the milk then frothing to the
precise requirements of the recipe. When the process is complete the unit automatically shuts off.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic
safety precautions should always be followed
to reduce the risk of fire, electric shock and/or
injury to persons, including the following:
Read all instructions prior to first use.
The appliance must only be plugged into
main socket with a ground supply. Check
that the supply voltage matches the
country's requirement on the rating plate of
the appliance.
Any
incorrect
connection
guarantee.
Unplug the appliance immediately if you
notice any anomalies during operation.
Always place your XL 2000 Perfect Milk
Frother on a flat, stable, heat resistant work
surface away from water splashes and any
external sources of heat.
Note that the body of the stainless steel
Perfect Milk Frother becomes hot during
operation. Do not touch the sides of the
product during use. Use the handle to move
the product when hot.
Do not touch hot surfaces. Use handles or
knobs.
Do not leave your hand on the power cord
or the hot parts of the appliance.
Asoccino-int-NAFTA.indd 1
TM
voids
the
, the KRUPS Perfect Milk Frother will
TM
To protect against fire, electric shock and
injury to persons, do not immerse cord,
plugs, base or body in water or other liquid.
Do not wash the appliance in the
dishwasher.
Close supervision is necessary when any
appliance is used near children. Keep
appliance out of reach of children. Children
should be supervised to ensure that they do
not play with the appliance.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capacities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Between 2 uses, let the appliance rest for 2
minutes before lauching a new cycle
Unplug appliance from outlet when not
in use, before and during cleaning. Allow
the product to cool down before putting
on or taking off parts, before cleaning the
appliance and before storing.
Your guarantee does not apply if the appliance
is not cleaned or maintained regularly or if there
is an unfamiliar part found inside the product.
EN
01
4/05/10 15:39:13