Preparing For Use; Putting Into Operation - Rohde & Schwarz ZPH Manual De Instrucciones

®
R&S Cable Rider ZPH
3

Preparing for Use

3.1

Putting into Operation

This chapter describes the basic steps to be taken when setting up the R&S
Cable Rider ZPH for the first time.
Risk of injury and instrument damage
The instrument must be used in an appropriate manner to prevent electric
shock, fire, personal injury, or damage.
● Do not open the instrument casing.
● Read and observe the "Basic Safety Instructions" delivered as a printed
brochure with the instrument.
In addition, read and observe the safety instructions in the following sec-
tions. Notice that the data sheet may specify additional operating condi-
tions.
Risk of instrument damage
Note that the general safety instructions also contain information on operat-
ing conditions that prevent damage to the instrument. The instrument's data
sheet may contain additional operating conditions.
Getting Started 1321.0944.02 ─ 04
Preparing for Use
Putting into Operation
8