Use And Operation - Klarstein 10031386 Manual De Instrucciones

Use and Operation

Before starting the unit
1. Select a suitable location, make sure the unit is near to an electrical outlet.
2. Install the flexible exhaust hose and the adjustable window slider kit.
3. Plug the unit into a right outlet.
4. Turn the unit on.
Heating operation mode (Cold wind type has no heating function)
1. Press the MODE button in a sequence until the heat display is lighted.
2. Press the "+"and "-"button to setting your desired setting temperature.
3. Press FAN button to select the fan speed.
4. Press ON/OFF button to start the unit and press it again to stop.
Cooling operation mode
1. Press the MODE button in a sequence until the cool display is lighted.
2. Press the "+"and "-"button to set your desired setting temperature.
3. Press FAN button to select the fan speed.
4. Press ON/OFF button to start the unit and press it again to stop.
Drying operation mode
1. Press the MODE button in a sequence until the dry display is lighted.
2. The fan will run at a fixed speed at this operation mode.
3. Close windows and doors for the best dehumidifying effect.
4. Press ON/OFF button to start the unit and press it again to stop.
Circulation operation mode
1. Press MODE button in a sequence until the fan display is lighted.
2. Press the FAN button to select the fan speed.
3. Press the ON/OFF button to start the unit and press it again to stop.
Timer operation
1. Press the TIMER button .
2. Press the "+" and "-"button to adjust your timer time. Note: "Time off " is effective only when the air-condi-
tioner is running. "Time on" is effective only when the air-conditioner is stopped.
22