Maintenance And Storage - KRATOS SAFETY FA 70 027 20 Guía De Uso

ANNUAL VERIFICATION:
For your safety, you should systematically check your equipment before, during and after use, if in doubt for a fall and at least
every 12 months by the manufacturer or a competent person authorized by him. This frequency may vary in accordance with the
frequency and the intensity of use. The descriptive data sheet must be filled in each time the product is checked.
MAINTENANCE AND STORAGE: (These instructions must be strictly observed)
During transportation, keep the equipment away from any cutting edges and in its packaging. Clean with soapy water, dry with
a dry cloth and hang it in a naturally ventilated area away from any direct fire or heat source, as well as any elements which
became wet during their usage. Bleaches and detergents are strictly prohibited. The equipment must be stored in a temperate, dry
and ventilated area in its packaging protected from sunlight, heat and chemical products.
Watch our videos
21