HOMEDIAGNOSTICS TrueTrack Manual De Instrucciones página 19

6. Match Code in Display with Code on Test Strip
vial label being used. If Codes do not match,
see Coding (pg. 9).
7. Press
appears in Meter Display.
Note: If you decide not to perform
a Control Test, press
remove Control Symbol.
8. Turn Control bottle upside
down. Squeeze one drop of
Control onto a clean tissue.
Wipe off bottle tip.
9. Gently squeeze a drop onto top
of closed vial cap. Touch edge of
Test Strip Sample Tip to drop of
Control (See pg. 5).
Note: A small piece of unused aluminum foil or
clear plastic wrap may be used instead of
vial cap. Dispose after use.
10. Allow drop to be drawn into Strip.
Remove Strip from drop when
Meter beeps.
. Control Symbol
to
14
Control
Symbol