HOMEDIAGNOSTICS TrueTrack Manual De Instrucciones página 24

7. Touch edge of Test Strip
Sample Tip to blood drop
and hold. (See pg. 5.) Allow
blood to be drawn into Test
Strip until Meter beeps.
Note: If Meter did not beep or begin countdown
soon after touching blood drop to Test Strip
Sample Tip, discard Strip. Repeat test with
new Test Strip and new blood drop. If
problem persists, see Troubleshooting.
8. After countdown, result is
displayed with date and time.
Remove Test Strip and discard.
Meter turns off.
Result is stored in Meter's Memory.
Record result with date in log book.
19