Turbo Function; X-Fan Function - Vaillant VAM 3-050 W2N Manual De Instrucciones

OPERATING INSTRUCTIONS
In order to program a switch off time for of the unit:
• With the unit switched on, press the TIMER OFF. The TIMER
OFF indicator starts to blink. Set the desired switch off time
of the unit by pressing the - / + buttons. Press the TIMER
OFF button again to confirm the desired switch off time.
In order to cancel:
• Press the TIMER ON or TIMER OFF button again.
NOTE:
i
REPEAT function available by default. If the program is
not canceled, it will be repeated daily.
NOTE:
i
Correctly set the clock before operating the timer.
NOTE:
i
Restart the time configuration after replacing the
batteries or after a possible power failure.
7.7.3

turbo function

Use the TURBO function when you need fast cooling (COOL
MODE) or fast heating (HEAT MODE).
2
Fig. 7.18 tURBO function selection.
- 16 -
Legend
1 tURBO icon
2 tURBO button
To activate or deactivate the TURBO function:
• Press the TURBO button for less than two seconds.
7.7.4
1
Fig. 7.19
Legend
1 X-FaN icon
2 X-FaN button
When pressing the "X-Fan" button in COOL or DRY mode,
the indicator in the remote control's display will light up and
the indoor unit's fan will remain functioning for aproximately
2 minutes , even after having switched the appliance off or
having it programmed for the switch off. Once this period of time
passes, the unit will automatically turn off, and the indoor unit's
COOL mode indicator will flicker every 10 seconds.
This causes the humidity in the indoor unit to be expelled,
keeping it dry and preventing it's components from going rusty
and bacteria from appearing.
The X-Fan function is not available in AUTO, FAN or HEAT
mode.

X-fan function

X-FaN function selection.
VAI 3-MWN-U_EN - 10/14 - Vaillant
1
2