Fulgor Milano FCLHD 8041 HID TS BK Instrucciones Para La Instalación Y Uso página 25

● The exhausted air must not
be conveyed in a duct used for
discharging fumes of applian-
ces powered by energy other
than electricity (heating systems,
etc.).
WARNING: This appliance is
not intended to be used with gas
hobs.
● To discharge the exhausted air,
regulations issued by competent
authorities must be followed.
● If the product is not equipped
with a plug or if, at the end of the
installation, the plug is not easily
accessible, it is necessary to ar-
range a device separating the
product from the electrical sy-
stem. The contacts of this device
must have an opening distance
of all the poles of at least 3 mm.
WARNING: Do not store liquids
in the cabinet, under the induc-
tion hob, where the electrical
components of the appliance
are located. Leaks or spillovers
on the electrical parts of the ap-
pliance are a cause of electrical
shocks.
Carrying out the cleaning ope-
rations without following the in-
structions is a risk of fire.
FCLHD 9041 HID TS BK
EN
FIRE RISK: Do not store any
flammable material in the ca-
binet, under the induction hob,
where the electrical components
of the appliance are located.
Do not pull the electrical wires.
The flat cable connecting the
main wiring assembly to the hob
must be placed on the rear of the
hob, to preserve it from any bre-
akage.
A distance of at least 15 cm must
be left between any object, sto-
red in the same cabinet where
the appliance is installed, and
the lower part of the induction
hob. In fact, the airflow coming
from the cooling system in the
lower part of the induction hob
must not be hindered.
● Do not modify or try to modi-
fy the characteristics of this ap-
pliance, as this is dangerous.
Any repair must be carried out
by authorized personnel. The
hoods must always be discon-
nected from power supply before
performing any cleaning or main-
tenance operation.
25