Lighting Instructions - CharGriller Grillin Pro 3001 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Lighting Instructions

Always open hood while igniting grill. If grill does not light, always wait 5 minutes for gas to clear before
relighting. Failure to do either may result in an explosive flare-up, which can cause serious bodily
injury or death. Once lit, but before cooking on grill for first time, let grill sit for 15 minutes with hood
closed. This heat cleans grill's internal parts from anything they may have come into contact with during
manufacturing and shipping.
Main Burners
1. Make sure there are no obstructions of airflow to gas unit. Spiders and insects can nest within and
clog the burner tube. A clogged burner tube can lead to a fire beneath appliance.
2. Make sure all burner knobs are in OFF position.
3. Open valve on LP gas cylinder.
4. To ignite a burner, push in and rotate knob to "HIGH," then push and hold
Electronic Ignition Button until burner lights. If burner does not light in
5 seconds, turn burner OFF, wait 5 minutes for gas to clear and repeat
procedure. Repeat for all desired burners. Light only burners intended for
use.
5. Adjust knobs to desired cooking setting.
After lighting, observe burner flame and make sure all burner ports are lit.
If burner flame goes out during operation, immediately turn gas off on control panel and gas cylinder
valve. Open hood and let gas clear for 5 minutes before relighting. Clean grill after each use. DO NOT
use abrasive or flammable cleaners, as they damage parts and may start a fire.
Side Burner
1. Open lid during lighting. Lid must be open when burner is on.
2. Burner valves must be in OFF position.
3. Open cylinder valve.
4. Push in and rotate side burner knob slowly, about ¼ turn, until a click is
heard. If burner does not light, immediately turn knob back to off and wait
5 minutes for gas to clear before repeating procedure.
5. After burner ignites, adjust knobs to desired cooking setting.
Shutting off Burners
1. Turn knob(s) counterclockwise to HIGH position, then push in and turn to OFF. Never force knob
without pushing in, as this can damage valve and knob. For side burner, push in and turn to OFF.
2. Promptly close gas cylinder valve.
3. Close grill hood.
C-3

Publicidad

Tabla de contenido
loading

Tabla de contenido