Maintenance; Handling Your Tft-1020 - Lenco TFT-1020 Manual Del Usuario

5. MAINTENANCE

5.1 Handling your TFT-1020

1. Do not drop the machine or heavy objects on top of the TFT-1020
2. Do not place the machine in a location subject to: Heat sources, such as radiators or air
ducts,
3. Direct sunlight, Excessive dust, Moisture or rain, Mechanical vibration or shock, Strong
magnets or speakers that are not magnetically shielded, Ambient temperature of more
o
than 35 C or less than 5
4. Do not place electronic equipment near the machine. The electromagnetic field of the
machine may cause a malfunction.
5. Provide adequate air circulation to prevent internal heat from building up. Do not place
the machine on porous surfaces such as rugs or blankets, or near material such as curtains
or draperies that may block its ventilation slots.
6. The machine uses high-frequency radio signals and may cause interference to radio or
TV reception. If this occurs, relocate the machine a suitable distance away from the set.
7. Use only specified peripheral equipment and interface cables; otherwise, problems may
occur.
8. Do not use cut or damaged connection cables.
9. If the machine is brought directly from a cold location to a warm one, moisture may
condense inside the machine, In this case, allow at least one hour before turning on the
machine, if any problems occur, unplug the machine and contact an authorized Service
Centre. To find the nearest centre or agent, visit the online support Web site.
10. Make sure you disconnect the power cord before cleaning the machine.
Figure 4.5.5
o
C and High humidity.
22