Emmaljunga Britax Baby Safe Plus SHR ll Manual De Instrucciones página 18

Usage of the Adapter
1
2
1
2
3
3
4
5
5
7
18
Attaching the adapter on to the chassis
• Engage the brake
• Release the carry-cot or seat-unit in accordance with the pram
manual
• Attach the adaptor onto the chassis by pushing the adapter into the
Easy Fix locking mechanism (1).
• The adapter should be turned so that the plastic ringd (2) points
towards the handle of the pram.
WARNING!
• Make sure that the adapter is attached into both locking
mechanisms of the chassis.
• Never lift the carseat when it is assembled onto the chassis.
• Always engage the brake when you attach the adapter onto the
chassis.
Click in the car seat onto the adaptor
• Hold the car seat by the handle and assemble it onto the adapter
(3) so that the foot end of the car seat is turned and in the same
direction as the the handle of the pram.
• Click in the car seat into the adapter by pressing it straight down
into the adapter untilk you hear a clicking sound. Make sure that
the carseat cliks in properly into the adapters two attachment
points.
• Hold the car seat at all times by the carrying handle. Do not release
your grip until you have secured the car seat into position.
Now the car seat is in place onto the adaptor.
WARNING!
• The foot end on car seat must always be the same way as the
handle of the pram.
Remove the carseat from the adapter
• Engage the brake
• Press the two buttons on the carseat (5) and lift the carseat straight
up (6).
WARNING!
• Always engage the brake before you attach and detach the carseat.
6
Release the adapter from the chassis
• Release the adaptor from the chassis by pulling the plastic rings (7)
which are located on the outside of the adaptor
• Pull the adaptor up from the chassis
IMPORTANT!
• Before you fold the chassis in accordance with the instructions of
the pram manual, you must remove the Car Seat. You do not need
to remove the adaptor before you fold the chassis.
Manual Carseat Adapter Britax v. 1.3