TECO 302 Serie Manual De Instrucciones página 349

EC DECLARATION OF CONFORMITY
WE:
TECO s
r
l
Via Pio La Torre 10 - 42015 Correggio (RE) - ITALY
DECLARE UNDER OUR SOLE AND EXCLUSIVE RESPONSIBILITY THAT THE MACHINE:
VEHICLE LIFT
TYPE: TECO 352
SERIAL No.:
TO WHICH THIS DECLARATION REFERS IS COMPLIANT WITH THE BASIC REQUISITES FOR HEALTH AND
SAFETY DEFINED BY ANNEXE I OF DIRECTIVE 2006/42/EC AND WITH THE FOLLOWING DIRECTIVES AND
HARMONISED PRODUCT STANDARDS:
- DIRECTIVE 2006/42/EC (MACHINE SAFETY)
- DIRECTIVE 2004/108/EC (ELECTROMAGNETIC COMPATIBILITY)
- DIRECTIVE 2006/95/EC (LOW VOLTAGE)
- EN 1493:2010 – VEHICLE LIFTS – Fp OJ 08.04.2011.
THE FOLLOWING HARMONISED STANDARDS AND TECHNICAL SPECIFICATIONS HAVE BEEN APPLIED TO
VERIFY COMPLIANCE WITH THE FOLLOWING DIRECTIVES:
EN 349:1993+A1:2008, EN 842:1996+A1:2008, EN ISO 13849-1:2008, EN ISO 4413:2010, EN ISO 4414:2010,
EN ISO 3746:2010, EN 10025:1990, EN 10083-1:1995, EN ISO 12100-1:2003, EN ISO 12100-2:2003,
EN 55022:2006+A1:2007, EN 60204-1:2006, EN 60947-5-1:2003, EN 61000-6-1:2007, EN 61000-6-3:2007,
EN ISO 14121-1:2007;
Correggio,
The machine falls within the list of machines of annexe IV of directive 2006/42/EC. The machine has been constructed in
conformity with section 7, paragraph 2 of harmonised standard EN 1493:2010 and the constructor has implemented the
procedure described in section 12, paragraph 3, letter a) of the said standard, with internal verification of the manufacturing
process conducted as indicated in annexe VIII. The technical dossier relative to construction, drafted in accordance with
annexe VII – Part A, and will be rendered available by Ing. Mauro BARBETTI, whose elected legal domicile is 42015 - Cor-
reggio (RE) Italy, Via PIO LA TORRE n°10, in response to requests originating from the national authority responsible for the
verification of compliance.
Automotive Equipment
IN ACCORDANCE WITH DIRECTIVE 2006/42/EC
_____________________
(Date)
MODEL: TECO 352 CSI
______________________________
(Signature of a legal rapresentative)
DIRETORE TECNICO
Ing. Mauro BARBETTI
E
349