Wall Mounting The Camera - Hitachi BCM241T08 Instrucciones De Seguridad Importantes

Wall mounting the Camera

1. Select a suitable location and draw an X at the desired locations for the
mounting screws. A paper mounting template (see below) is included
for referencing the mounting locations of the anchors/screws.
2a. Mounting onto a wall with wood or drywall.
Use a screwdriver to screw the included mounting screws (4x25) into
the wall, leaving approximately 6mm or 1/4 inch of the screw exposed
(to mount the camera to).
2b. Mounting onto a concrete or masonry wall.
Use a hammer drill, to drill a pilot hole (6.5mm or 1/4 inch) for the includ-
ed plastic wall anchor. Be sure to drill the pilot hole to at least 26mm or
1 inch in depth.
Wood or Drywall wall
2a
1
Concrete or Masonry wall
2b
1
23