Kemper PROFILER REMOTE Inicio Rápido página 17

REMOTE QUICK START 17
Pedal
5
Wah/ Pitch/ Volume
Pedal*
* Wah Pedal also controlling Pitch and Volume („WahPedal to Pitch" and „WahPedal to Volume"); Morphing triggered via buttons
* Wah Pedal also controlling Pitch and Volume („WahPedal to Pitch" and „WahPedal to Volume"); Morphing triggered
via buttons.
SETTINGS
You can find the LCD CONTRAST knob on the rear side of the Remote. All other settings are edited and memorized
within the System Settings of the PROFILER. Consequently, these are also included in the PROFILER backups. The
Main Manual includes a dedicated "PROFILER Remote" chapter, which covers all relevant information.
CABLING
PROFILER and Remote communicate with each other via an ethernet cable. The cable included in the Remote
package with its Neutrik® etherCON® cable connector carrier has been carefully selected and is ideal for this purpose.
If you decide to use any 3rd party cable, please make sure it meets our quality standards.
Cables in excess of 10m (30ft) might require an extra power supply. This will allow distances of more than 100 m
(300 ft) to be bridged reliably. Details can be found in the Main Manual.