Operating Instructions - NuWave 30801 Manual Del Usuario

CARE & MAINTENANCE - WOK (CONTINUED)
3. Give Wok a hard scrub with a folded paper towel. (Caution: Surface Will
be Hot!)
4. Cool the Wok.
5. Rinse under running water and dry thoroughly.
• Afterward, a light rub of peanut oil can be applied to Wok once again.
Note: The "conventional" ideas of cleanliness and hygiene with cookware are
somewhat counterproductive when dealing with a genuine wok—the residues
that remain on the Wok's surface after dry-wiping it after use will, over time,
form a layer that will serve to enhance the taste of your stir-fried foods.

OPERATING INSTRUCTIONS

General Operating Instructions:
• Place the Induction Wok Base on a stable, level, non-metallic surface.
• Never use the Induction Wok Base on a flammable surface (e.g., tablecloth,
carpet, etc.).
• Do not block the ventilation slots of the Induction Wok Base. This may
cause the unit to overheat. Maintain a minimum distance of 3-5 inches
from walls and other objects, appliances, etc.
• Do not place devices or objects that are sensitive to magnetic fields
on top of or next to the NuWave Precision Induction Wok
cards, cellphones, radios, TVs, video recorders, etc.).
• Do not use the Precision Induction Wok in the proximity of open fires,
heaters, or other heat sources.
• Do not place on stovetop.
• Ensure that the power cable is not damaged or compressed beneath the
Induction Wok Base.
• The power cable must not come into contact with sharp edges and/or
hot surfaces.
• Prior to connecting the Precision Induction Wok, confirm that the voltage
needs indicated in this manual correspond to the voltage supply in your
home. A wrong connection may lead to the unit's damage and possible
injury to persons.
• In the event that damage to the unit is observed, immediately
disconnect the Precision Induction Wok from the power supply.
14
Owner's Manual
(e.g., credit
™