(8) Taking photographs with manual flash activation and slower shutter speeds
(can only be selected using "2nd setting level", see "Selectable modes", p. 89)
Setting/Displays
Operating step
1. When setting the
function
2. After setting the
function/when
pressing the shutter
release button
(at least to the
pressure point)
3. During the exposure
(only for automatic
switching to long
time exposures)
4. After the exposure
Note: With low light, i.e. slower shutter speeds than
the flash, the camera should only be moved when the film has been advanced.
In the data panel
q
and
flashing
S
q
and
; also
B
S
for automatically
controlled long time
exposures
q
,
and
; at the
B
S
same time the counter
switches to display the
expired exposure time
q
and
S
1
/
60
In the viewfinder
–
As for default mode (No. 1); for automatic switching to long time expo-
sures, for 2 s the following appear alternately:
aperture) or the set aperture (with A) and
sure times >30 s)
The relevant focus status display and
As for default mode (No. 1)
s, the camera should be held steady, supported, or a tripod used. Even after
98
q
S
(with P, for the largest
(representing the expo-