Adjusting The Height Of The Upper Rack; Removing The Upper Rack - Samsung DW80K7050 Serie Manual De Usuario

Ocultar thumbs Ver también para DW80K7050 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ADJUSTING THE HEIGHT OF THE UPPER RACK

You can adjust the height of the upper rack in your Samsung dishwasher so that the lower rack can
accommodate larger sized dishes. With the upper rack set at the highest position, the lower rack can
accommodate plates up to 12 in. (30 cm) in diameter and the upper rack can accommodated plates up to
8 in. (20 cm) in diameter.
DW80K7050, DW80K5050 Series
1. To lower the upper rack by 2 in. (5 cm), pull
the adjustment handles located at the left
and right sides of the upper rack and push
the upper rack downwards slightly at the
same time.
2. To raise the upper rack, just pull the upper
rack upwards. The adjuster handle will latch
and the upper rack will move to the high
position.
We recommend adjusting the height of the
upper rack before loading dishes into the
CAUTION
rack. If you adjust the the rack after loading
the dishes, you may damage the dishes.

REMOVING THE UPPER RACK

Pull the upper rack towards the front and then remove it by lifting it up slightly and pulling it towards the
front. See the illustrations below.
While the upper rack is removable, it must be installed for the dishwasher to operate properly.
If you attempt to operate the dishwasher without the rack, noise will occur and the dishwasher will
CAUTION
perform poorly.
Step 1.
Step 2.
English - 15
A
Step 3.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dw80k5050 serie

Tabla de contenido