Sharp QS-1760H Manual De Manejo página 6

Note: • Be sure to set this selector to the "•" position after storing an
each rate.
• Only one rate can be stored. If you enter a new rate, the previous
rate will be cleared.
ADD MODE SELECTOR:
"A/+" position – Effective only in addition and subtraction:
Use of the A/+ mode permits addition and subtraction of
numbers without an entry of the decimal point. When the
A/+ mode is activated, the decimal point is automatically
positioned according to the decimal selector setting.
EXAMPLES: Set A/+- • -A/x to A/+
A. Set decimal to 2
B. Set decimal to 3
Use of the
the Add mode and decimally correct answers will be
printed at the preset decimal position.
EXAMPLES: Set A/+- • -A/x to A/+, 5/4
A. Set decimal to 2
B. Set decimal to 3
C. Set decimal to 2
"A/x" position – Multiplication and division:
When the A/x mode is activated, the number entered
before
• A maximum of 4 digits can be stored (decimal point is
not counted as a digit).
Enter 123456
Enter 123456
, , and
Enter .1234
100
Enter 2
3
Enter 123
10
Note that decimal point was entered.
or key will override the add mode. But the
– 4 –
1 , 234 . 56 +
Tape prints
123 . 456 +
Tape prints
keys will automatically override
0 . 1234 ×
Tape prints
Tape prints
Tape prints
100 . =
12 . 34
2 .
÷
3 . =
0 . 667
1 . 23 +
10 . 00 +
11 . 23