Cutting Unit Specification; Recommended Lubricants; Cutting Performance (Area); Cutting Performance (Frequency) - Ransomes LH Serie Manual De Seguridad, Funcionamiento Y Mantenimiento

4.4 CUTTING UNIT SPECIFICATION __________________________________________

Construction
Reel Length
Number of Knives
Number of Blades
Reel Diameter (New)
Minimum Reel Diameter (Before Replacement)
Fixed Head Height of Cut (Standard Blade)
Floating Head Height of Cut (Standard Blade)
Floating Head Height of Cut (Thin Blade)
Rear Roll
Height of Cut Adjustment
Transmission
Maximum Reel Speed at Maximum PTO Speed
NOTE
These cutting units are designed to cut grass of maximum height 100mm down to the available height of cut
range.

4.5 RECOMMENDED LUBRICANTS __________________________________________

Hydraulic Oil: ISO VG 46.
Grease: Lithium Based General Purpose Grease similar to Shell Darina R2.

4.7 CUTTING PERFORMANCE (AREA) _______________________________________

1.5 hectares / hour at 10 km
10% allowance is included for normal overlaps and turning at the end of each cut.

4.8 CUTTING PERFORMANCE (FREQUENCY) _________________________________

4-blade Fixed Head:
6-blade Fixed Head:
6-blade Floating Head:
24 cuts/m at 8 km/h
36 cuts/m at 8 km/h
58 cuts/m at 8 km/h
Magna Magna
Heavy-duty pressed steel bolted construction
762mm 762mm
4 6
N/A N/A
254mm 254mm
235mm 235mm
12.7mm - 89mm
12.7mm - 35.7mm
9mm - 32mm
60mm Diameter
Adjustable screw system on
rear roll
By hydraulic motor through gear & pinion to reel.
4 SPECIFICATION
Sportcutter
762mm
6
N/A
197mm
178mm
Adjustable screw system
on front & rear roll
1240rpm
Verticut
762mm
N/A
54
197mm
N/A
en-13