Maintenance & Lubrication Chart; Fluid Requirements - Ransomes LH Serie Manual De Seguridad, Funcionamiento Y Mantenimiento

8.1 MAINTENANCE & LUBRICATION CHART _________________________________
Interval
First 50 hours
Daily
10 hours
Weekly
Every 50 hours
End of season
Every 1000
hours
A = Centre Lift Arm Pivot, B =Cutting Unit Pivot, C = Cutting Unit Bearing Housing, (see
A Hydraulic Oil (with filter)
B P.T.O. Gearbox
C Cutting Unit Gearboxes
D General Lubrication
E Power Take Off Shaft
MAINTENANCE AND LUBRICATION CHART
Item

Change P.T.O. gearbox Oil

Check Hydraulic Fluid Level.

Check for Play in Trailing Arm Spherical Bearing.

Check for Loose Components.

Check for Hydraulic Leaks.

Check P.T.O. Gearbox Oil

Lubricate all Cutting Unit Grease Fittings.

Lubricate P.T.O.

Lubricate Control Valve Linkage.

Change Hydraulic Oil & Filter.

Lubricate Cutting Unit Gearboxes.

Change P.T.O. gearbox Oil
Lubricate all Grease fittings weekly

FLUID REQUIREMENTS

8 MAINTENANCE & LUBRICATION
diagram)
Quantity
40 litres
0.52 litres
-
Lithium Based General Purpose Grease
-
-
Type
ISO VG 46
Shell Spirax G90
Shell Alvania HDX2
similar to Shell Darina R2
Rocol GP1 Grease
Section
en-29