Setting The Brightness - AL-KO PURE Instrucciones De Operación

Operation
Selecting colour levels
You can set up to ten colours and up to nine colour change intervals.
Selecting colour levels 1 -
10
Selecting colour level 0
Changing colour levels
You can manually assign colour levels 1 through 10 with any available colour.
1. Press and hold the colour button until it flashes.
2. Change the colour of the colour level by pressing the "+" or "-" button.
3. Re-press the colour button to save the colour to the respective number.
14.5

Setting the brightness

1
2
3
Press the Brightness button to set the brightness.
The Brightness button illuminates.
Display
Notifications on the display Meaning
"0"
"1 - 10"
Setting the brightness level
You can set up to ten brightness levels.
Setting the brightness level
Translation of the original operating instructions
Press the "+" button to select the colour. Press and hold the "+" button
to change the colour automatically.
Press the "-" button to select the colour. Press and hold the "-" button to
change the colour automatically.
Press the Colour button twice in succession to select colour level "0".
h
Test
Service
The illumination is turned off.
Brightness level 1 - 10 is set.
Press the "+" button to increase the brightness level. Press and hold the
"+" button to increase the brightness level automatically.
Press the "-" button to decrease the brightness level. Press and hold the
"-" button to decrease the brightness level automatically.
1 Brightness button
2 "-" button
3 "+" button
41