Pool Data Menu - Pentair Water Pool and Spa IntelliFlo VF Manual Del Usuario

Pool Data Menu

Use the Pool Data menu to confi gure IntelliFlo for the pool and spa system. From this menu you can set the
language of the control panel LCD, enter an address for the IntelliFlo pump when connected to an IntelliTouch
system, enter the volume of pool water in cubic meters (m
temperature.
To access the Pool Data menu:
1. Ensure that the green power LED is on and the pump is stopped.
2. Press the Menu button. "Pool Data" is displayed.
3. Press the Select button to select it.
a) To choose the language in which information is displayed in the Control
Panel:
setting (Default ENGLISH). Press the Select button to select it. Use the Up
and Down arrows to scroll through the six available languages (ENGLISH,
DEUTSCH, FRANÇAIS, ESPAÑOL, ITALIANO, NEDERLANDS). Press
the Enter button to select one of the languages.
b) To enter the pump address:
to the "Pump Address" setting. Press the Select button to select it. To change
the setting, press the Left and Right arrows to select which digit to modify,
then use the Up and Down arrows to change the selected digit.When you are
done, press the Enter button to save the changes. To cancel any changes,
press the Escape button to exit edit mode without saving.
c) To enter the pump volume (pool size):
to scroll to the "Pool Volume" setting. Press the Select button to select it. To
change the setting, press the Left and Right arrows to select which digit to
modify, then use the Up and Down arrows to change the selected digit. When
you are done, press the Enter button to save the changes. To cancel any
changes, press the Escape button to exit edit mode without saving.
Enter the estimated volume of the pool expressed in cubic meters (m
IntelliFlo can accept a value for pool volume from 4 to 3785m
117 m
accurately IntelliFlo will perform turnovers in Filter Mode. IntelliFlo uses this
value, in conjunction with parameters entered in the Filter Settings menu, to
determine turnover and fl ow rates, and to time cycles in Filter Mode.
Use the Up and Down arrow buttons to scroll to the "Language"
3
). The closer the estimated volume to the actual pool volume, the more
3
), and enter an estimate of the pool water
Use the Up and Down arrow buttons to scroll
Use the Up and Down arrow buttons
3
).
3
(Default
IntelliFlo VF Installation and User's Guide
23
®
MENU 12:15
Pool Data Pool Data
®
Pool Data 12:15
ENGLISH
Language
®
Pool Data 12:15
1
Pump Address
®
Pool Data 12:15
117.m³
Pool Volume