Maintenance And Cleaning - Jata electro BT1032 Instrucciones De Uso

• Plug the appliance into the mains.
• Turn the speed selector (5) clockwise between Min. and Max. position till getting the desired speed.
• You may add ingredients to the jug while in use without open the lid. To do so, remove the stopper
(1). Turn it slowly anti-clockwise and take it out. Add the ingredients into the jug and place again the
stopper making coincide the two flanges into the guides of the lid and turn it slightly anticlockwise.
• Once you have finished, set the speed selector to its "0" position and wait for the blade to stop
turning completely before removing the jug.
KNOBS USING
• To use any of the 3 knobs, the speed selector must be placed at the
PULSE KNOB
• This knob gives you the option to use the blender intermittently, as it will only work while you keep
that knob pushed, it will stop when it is released.
ICE CHRUSHING KNOB
• Pushing that knob the blender will works intermittently. For it, we suggest to use little ice cubes, or
you can bit them before putting them on the blender, to avoid the "igloo" effect. This means that
the crushed ice gets adhered to the blender walls, and it impedes that the other ice cubes arrive to
the base to be crushed.
SMOOTHIE KNOB
• Push this knob and the blender will work at the maximum power.

MAINTENANCE AND CLEANING

• Before you proceed to cleaning, make sure the appliance is unplugged from the mains.
• You can remove the blade set for cleaning following the next steps.
- Place the jug faced down and remove the base turning it until clockwise.
- Remove the ring by turning it anticlockwise direction and remove the blade set and the silicone
joint.
- You can remove the blade by keeping the blade set upside down, by holding the blade with one
hand and turning the transmision clockwise.
• The jar once removed can be washed in the dishwasher. The lid, the cap and the other components
of the jar can be cleaned with soap and water, never in the dishwasher, trying to rinse and dry them
well.
• Clean the main body with a slightly damp cloth.
• Do not use abrasive or chemical products, such as metallic scourers, which may deteriorate the
surfaces of the appliance.
• Once cleaned, aseembly the jar by reversing the above steps and taking the precaution that all
components are in their original position.
ENVIRONMENT PROTECTION
• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
11
position.