Tips & Troubleshooting; Tända Travel Tips - Tanda 7 Serie Manual Del Usuario

Three Beeps
Four Beeps
SENSORS
An internal Temperature Sensor will turn the device
off if the treatment head surface gets too warm. Allow
the device to cool for 5-10 minutes before restarting.
The Contact Sensor ensures that the device will only
activate when in contact with skin. The device will turn
off automatically if it is not applied to the skin within
20 seconds or if removed from the skin for more than
20 seconds.
TIPS & TROUBLESHOOTING
TÄNDA TRAVEL TIPS
The Tända light therapy device's light weight design
and compact form makes it an easy travel companion.
Overnight Travel
If you will be away for a day or two, and you don't
want to miss a treatment, you can travel with your
device without having to recharge it while away from
home. Simply remove the fully charged device from
the recharging stand and insert the plastic plug (4)
in the bottom of the device. The plastic plug will
prevent the device from discharging. A fully charged
device will be able to deliver 10, three-minute cycles
between charges.
High temperature on treatment
head surface
Treatment head has been
disconnected
6