SELFSAT Snipe Manual De Usuario página 10

D. Changing the satellite
Function
Up / Down button" Light
E. Back to Home position
Function
"HOME" Button
F. GPS LED light
Function
Description
"Satellite
i. If you want to change desired satellite, you could change
the target satellite using "Up/Down" button, then press the
"OK" button to accept the new satellite.
"OK" Button
Description
i. Whenever you wish to antenna back in Home position,
press "Home" button and hold for a few seconds.
Description
i. GPS LED confirm the current location from 24 numbers of
GPS satellite in the world .
ii. When your SNIPE identify GPS signal, GPS LED light will be
solid on, no matter antenna is pausing or moving.
GPS helps better able to searching satellite faster & catch
"GPS" light
the best satellite signal, and help SNIPE can better able to
catch the best elevation & skew angle.
iii. Also, while program updating, GPS LED light will be flashing to
show the update procedure is processing. For this time, GPS
LED light on doesn't mean communicating with GPS satellite.
Operation
Operation
Operation
9